常年供應的各種進口UV燈,點光源,汞氙燈,水銀氙燈,紫外線硬化裝置用燈等特種光源主要有:1.日本USHIO:USH-250BY;USH-250D;USH-255BY;UXM-Q256BY;USH-200DP;USH-250DLA,USH-3502DK;UXL-16S;UXL-S150MO;UXL-75Xe;UVL-2000RS;UXL-500SX2.濱松HAMAMATSU:L6721;L6722;L10862;L8251;L8252;L10852;L7891;L2195;MX30203.松下NAIS:ANUPS204;ANUPS252;ANUPS2504.SAN-EI:L2001-01L;L3501L;L50015.HOYA:250AF;250DL;200MX6.MORITEX:LUM250;MH-250-7500;MCR 180K03H/S;7.YUMEX系列:YMXL-U256BY;YMXL-U200DFO;YMXL-U200EF;YMXL-U200EFO; YMXL-U200CF;YMXL-U200DF;YMXL-U200YA;YSH-250BY;YSH-250D;YSH-250LT; YSH-102D; YSH-102DH; YSH-255BY8.ORC:HHL-800/C-FL (ORC/800W) ; HHM-1200E-FS (ORC/200W);HHL-4000/C-FS9.YUMEX:YGL-321;YGL-621同時還銷售UV點光源照射機配套的石英光纖,常用的主要型號有:AF-102NQ-X,AF-103NQ-X,AF-104NQ-X, AF-106NQ-X,SF-102NQ-X,SF-104NQ-X,A4455-01,A4832-01,A4093,A3806,A8771,A2873,A10014-35-0110,A10014-35-0210,A10014-35-0220(特殊定做)等;以及各種lens聚焦鏡,濾光片。適用范圍:UV膠粘劑固化。電子、精密零件、磁頭、光學鏡片、液晶顯示板、微電機、醫療用品、工藝品、實驗室等。凡涉及精密、小巧的UV固化領域均能適用;或與自動或手動點膠機配套使用。
QHLWGY型渦輪流量傳感器是一種精密流量測量儀表,與相應的流量積算儀表配套可用于測量液體的流量和總量。廣泛用于石油、化工、冶金、科研等領域的計量、控制系統。配備有衛生接頭的渦輪流量傳感器可以應用于制藥行業。
一體化渦輪流量計結構為防爆設計,可以顯示流量總量,瞬時流量和流量滿度百分比。電池采用鋰電池,單功能積算表電池使用壽命可達5年以上,多功能顯示表電池使用壽命也可達到12個月以上。
一體化表頭可以顯示的流量單位眾多,有立方米,加侖,升,標準立方米,標準升等,可以設定固定壓力、溫度參數對氣體進行補償,對壓力和溫度參數變化不大的場合,可使用該儀表進行固定補償積算。
液體渦輪流量計的技術性能
Late 2003. The QSTAR XL Hybrid LC/MS/MS System is the premier quadrupole time-of-flight LC/MS/MS system- a high-performance, hybrid mass spectrometer designed for proteomics, drug discovery, and drug development.
Small Molecule Drug Metabolism
High mass accuracy for conclusive compound identification. Metabolite ID software to provide answers from complex data. Automated method generation for unattended analysis. New DC quad to improve ruggedness. NanoSpray source for sample-limited analysis. Enhanced ion optics provide the highest sensitivity and reliability. Unique pulsing/trapping capabilities and patented LINAC® collision cell technology enable you to scan precursor and product ions sensitively. Excellent mass accuracy and stability ensures you obtain unequivocal molecular weight and high-quality structural information. Extended MS and MS/MS mass range (6,000 and 40,000 m/z) broadens the reach of your protein and peptide studies. oMALDI™ 2 ion source enables LC MALDI workflow for sensitive peptide-based and metabolite identification experiments. Comprehensive selection of interchangeable, application-specific ion sources--from atmospheric pressure ionization (API) to matrix-assisted laser desorption ionization (MALDI)--offers you optimal flexibility.
Groundbreaking Technologies As the highest-sensitivity hybrid quadrupole time-of-flight mass spectrometer, the QSTAR® XL LC/MS/MS System enables you to determine unequivocally the molecular weight and high-quality structural information of drug metabolites, as well as the type and location of post-translational modifications (PTMs). Our unique pulse/trapping capabilities, patented Q0 collisional focusing, and LINAC® collision cell technology enable you to get sensitive and superior MS and MS/MS scans with a maximum duty cycle.
A Powerful Combination Together with our Analyst® QS software, the QSTAR XL system offers a full complement of features to simplify every aspect of methods development, data acquisition, and processing, including flexible control of popular LC platforms. The system design enables you to exchange ionization sources easily to accommodate a wide range of applications and flow rates. Finally, to obtain more useful information per sample, you can pull it all together with advanced application software, including Metabolite ID, BioAnalyst™, Pro ID, Pro BLAST, Pro ICAT and oMALDI Xpert.
Accurate Mass for Metabolite Identification The QSTAR® XL system provides the detailed accurate mass information you need in drug discovery and development to analyze the elemental composition of unknown drug metabolites. With accurate MS/MS-spectra-based mass assignments and structural information, you can confidently identify and fully characterize impurities as well as known and unknown metabolites. Further, you can take advantage of the LC MALDI workflow to re-analyze your complex metabolite samples to uncover even more information.
The Solution for Challenging Protein Analysis The QSTAR® XL system is the best solution for challenging proteomics and protein analysis experiments such as de novo sequencing, intact protein analysis, PTMs, and relative quantitation. Together with our tagging chemistries, electrospray and MALDI ion sources, and applications software, this tandem MS system offers the sensitivity, robustness, and versatility you need to solve your protein problems. And now, at the click of a button, you can access key information on protein molecular functions, biological processes, known modification sites, references, and comprehensive genetic information from the Celera Discovery System™ Online Platform.
品 牌 | Sensitech Inc (美國開利信德) |
型 號 | Z4000-05-020 (5天) Z4000-10-020 (10天) Z4000-20-020 (20天) Z4000-40-020 (40天) Z4000-75-020 (75天) |
供貨期 | 14天以內 |
保質期 | 12個月(自購買日期) |
技 術 參 數 | 測溫范圍: -29°C ~+38°C 測溫精度: ±1.1°C全測量范圍 記錄時間: 5天 /10天 /20天 /40天 /75天 紙帶分辨率: 5 天 2.50 inches /每天 10 天 2.50 inches /每天 20 天 2.50 inches /每天 40 天 0.73 inches /每天 75 天 0.73 inches /每天 電池壽命: 1.5V AA 電池 防篡改安全密封: 出廠前已預封 運輸信息條: 防水,粘貼于EZT上 外 殼: 高品質ABS塑料 包 裝: 40個每箱 重 量: 297.7 g 尺 寸: 16.51cm x 6.50cm x 8.89cm 溫度標定: NIST可追溯 |
LymphoprepTM分離液
工作原理
PBMC與血液中的其他成分存在密度差異,利用密度在1.077±0.001g/ml之間而且近于等滲的LymphoprepTM溶液作密度梯度離心時,紅細胞和粒細胞由于密度大,故沉于分離液底部。PBMC密度稍低于分離液,故位于分離液界面上,獲得PBMC。LymphoprepTM分離液含有多糖(polysacccharide),多糖能粘附在細胞表面,使紅細胞和粒細胞聚集下沉,但它對淋巴細胞的活性和紅細胞和粒細胞進一步分離有負面影響。
注意事項:
1、該分離液僅適用于人體的外周血液,不適用于動物。
2、使用該分離液時,需將待分離的血液用生理鹽水做等體積的稀釋。
3、分離液的保存應置于無菌環境,并避光保存。
4、詳細操作步驟見產品說明書。
技術參數
成分:泛影葡胺鈉(Sodium diatrizoate):9.1% (w/v);多糖:5.7% (w/v)
密度:1.077±0.001g/ml
滲透性:290±15mOsm
內毒素含量:<1.0EU/ml
大量現貨,服務好,有質保。
測量參數 | |Z|,|X|,C,L,X,B,R,D,Q,G,θ |
測試頻率 | 30Hz至200kHz,共20,000個測試頻點 |
測試電平 | 10mV至1.5V,以10mV步進 |
顯示范圍 | |Z|,R,X :0.00001Ω—99.999MΩ L :0.00001μH—9999.99H C :0.00001pF—999999μF B,G :0.00001μS—99.9999S D,Q:0.00001—9999.9 θ :0.00001°—179.999° |
基本度 | 0.05%(基本量程內) |
測量速度 | 慢速2次/秒,中速7次/秒,快速20次/秒 |
等效電路 | 串聯,并聯 |
平均次數 | 1—99 |
清零功能 | 開路,短路,點頻清零 |
輸入阻抗 | 30Ω 100Ω可選 |
顯示方式 | 直讀,檔號和檔計數 |
其他功能 | 十二檔分選,檔計數,訊響位選擇,測量值平均,設定參數保護功能 |
工作溫濕度 | 0℃~40℃, ≤85% RH |
電源要求 | 198-242V AC, 47.5-52.5Hz |
功耗 | ≤40VA |
接口 | Handler接口、RS232接口(選件) |
外型尺寸 | 405×140×350(mm) |
Meet the new optical measurement system for absolute irradiance measurements of solar simulators and other radiant sources. The new RaySphere from Ocean Optics measures absolute irradiance over spectral ranges from the UV to the NIR (350 to 1700 nm).
This portable system is ideal for solar simulator manufacturers and research and development labs as a tool to validate the output of installed solar flashlamps. The flash of a solar simulator is used within the photovoltaic (PV) manufacturing process for the binning of cells according to spectral response and for final PV module efficiency measurements.The RaySphere system delivers the accuracy and resolution needed to measure and analyze the performance and stability of the flasher with ultralow jitter triggering electronics for timing the measurement to the flashes. Calibration has been validated by an accredited certification lab to ensure accurate detection, enabling evaluation and qualification of the spectral distribution of solar flashers and simulators according to the IEC60904-9 (2007) standard.The system includes two thermoelectrically cooled detectors that perform repeatable and accurate spectral analysis of solar flashers from 350 to 1700 nm, and a second version contains a single cooled detector for measurement to 1100 nm.
RaySphere includes high-speed electronics and an intuitive powerful software interface. Brief measurement times enable detection of a complete spectrum during a flash or even during a portion of the flash. The measurement can be triggered by a fast response photodiode that reacts on the increasing intensity of the flashlight with sub-microsecond response times.
Trigger Mode
Features
Under the Hood
| RaySphere | RaySphere 1700 |
Spectral range: | 350-1100 nm | 300-1700 nm |
Spectral resolution: | 1.9 nm (FWHM) for 300 - 1100 nm 12.5 nm (FWHM) for 1100-1700 nm | |
Optical input: | 50 mm integrating sphere | |
Detector types: | TEC stabilized Hamamatsu CCD sensor | TEC stabilized Hamamatsu InGaAs sensor |
Dynamic range: | 25000:1 (Back-thinned Si) 15000:1 (InGaAs) | |
Corrected linearity: | >99.8% | |
Minimum integration time: | 8 ms | |
Calibration: | Calibrated for irradiance measurements using national traceable standards (NIST, PTB, CNIM) | |
Calibration Accuracy: | Validated by accredited certification institute, typical values better than 2% accuracy in 400-1100 nm range | |
Triggering options: | Built-in photo trigger, external trigger, manual trigger | |
Operating environment: | Ambient Temperatures 10-35 ºC | |
Software: | Custom Analysis Software for Windows XP, Vista and 7 (32 and 64 bit) | |
Communications: | USB 2.0 high-speed |
Photo-Trigger Specifications
Jitter (Realtime): | <100 ns |
Jitter (Software displayed): | 164 µs |
Minimum measurement time: | ~9 ms |
Programmable trigger delay: | 1040 µs - 168 ms |
Trigger delay increment: | 2.56 µs |
Time resolution of display: | +/- 41 µs |
技術指標1.量程及分辨率 9999μg/mL 分辨率1μg/mL(1μg/mL=1ppm=1mg/kg下
同) 999.9μg/ml 分辨率0.1μg/ml 99.99μg/ml 分辨率0.01μg/ml 9.999μg/mL 分辨率0.001μg/mL2.穩定性:儀器預熱20分鐘后,數字顯示值漂移在三分鐘內不超
過0.5%。(透光度測量)3.重復性誤差:以90μg /mL重鉻酸鉀誤差不大于0.5%。(透光度
測量)4.波長范圍:紅光620±4nm 藍光440±4nm6 5.靈敏度:紅光≥4.5 ×10-5 藍光≥3.17×10-3 6.線性誤差:以90,150,180,240μg/mL重鉻酸鉀溶液試驗
,線性誤差均小于5%。7. 同時測5個土樣≤50分鐘(含前處理時間)8.小于10分鐘即可完成氮、磷、鉀的浸提。9.工作穩定性優于國家標準JJG179-90指標的6倍,重復性達到
光柵型分光光度計指標水平。10.具備磷溫度自動校準功能11.功耗:交流≤5W 12.電源:交流220V±22V、直流電12V+6V(可用車載電源)
。13、測試速度在正常熟練程度下,測銨態氮、磷、鉀要40分鐘(含土樣前處理
及藥劑準備)。外形尺寸及重量14、儀器箱:410×320×150mm含藥品重3.1kg。
氣動薄膜Y型疏水閥是本公司根據熱電廠設備疏水而專業開發設計生產的新一代蒸汽疏水閥,該產品接近直線的流通設計,減小流阻,二次節流原理,減少沖蝕,提高壽命。
特點:閥芯、閥座采用整體硬質合金,關閉內漏≤VI級,可拆卸中腔密封設計,杜絕外漏,檢修方便等特點,還可在易燃,易爆場合使用,根據控制系統或調節儀表的信號,切斷或開啟閥門,從而實現對被控參數的使用要求。因此它廣泛應用于火電廠等行業的遠程控制。
詳細內容及技術要求歡迎來電垂詢!