產品型號:DT719-DF2675B產品描述:■通用型泄漏電流測試儀器■可測量各種低壓用點設備的泄漏電流■測試電壓、泄漏電流和測試時間均為數字顯示■泄漏電流值及測試時間均可預置
DF2675A/B/C | |
測試電壓 | 0~250V |
測試電壓波形 | 正弦波 |
泄漏電流測試范圍 | 0~20mA |
測試準確度 | ±5% |
泄漏電流預置范圍 | 0.1~20mA |
隔離變壓器容量 | ZC2675A:300W |
ZC2675B:1000W | |
ZC2675C:2000W | |
測試時間 | 1~99可設置或手動 |
環境類測試儀器的詳細介紹 |
環境試驗箱:恒溫恒濕試驗箱、濕熱試驗箱、可程式恒溫恒濕試驗箱、高低溫交變濕熱試驗箱、調溫調濕試驗箱、單點式恒溫恒濕試驗箱、步入式恒溫恒濕房、高低溫試驗箱、高溫老化箱、各種精密烤箱、冷熱沖擊試驗箱、鹽水噴霧試驗箱、二氧化硫試驗箱、淋雨試驗箱、滴濺試驗箱、砂塵試驗箱、耐黃變試驗箱、日照試驗箱、紫外光線老化試驗箱、氙燈老化試驗箱、臭氧老化試驗箱、霉菌試驗箱等環境試驗箱、UV爐、另可根據需要定做非標規格設備.13728171808 |
Measurement of torque driver / torque wrench |
仠 TORQUE TESTER 丂DIS-IP series |
![]() |
Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D). |
Specification | DIS-IP05 | 俢IS-俬俹5 | 俢IS-俬俹50 | 俢IS-俬俹200 | 俢IS-俬俹500 | |
Measuring range (at time of Track) | 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in | 0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in | 030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in | 3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in | 3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in | |
Accuracy | 亇0.5% (499 or less digit亇3digit) | |||||
Display | The 4 figures digital display of LCD | |||||
The measurement direction | CW-CCW (rightleft) | |||||
Measuring mode | P-P Peak | Peak load value hold. | ||||
T-R Track | Indication of real time torque value. | |||||
P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
Decision function | Setting of torque value | A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||||
One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
Data spec. | Data transfer | ASCII fomat (Baud rate :19200) | ||||
Data memory | 800 data | |||||
Power supply | Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh | |||||
Auto power save | 10 minutes no use, automatically switch off. | |||||
Charging time | about 3 hours | |||||
Continunous working time | 12 hours | |||||
Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
Weight | Meter part 520g | |||||
Code length | Standard 1m (there are automatic machines no less than 4m as an option.) | |||||
Accessories (one piece each) | AC/DC adaptor | |||||
An inspection report, a proofreading certificate, a traceability system figure |
Detection machine size figure | Detection machine outside figure | ||||
Form | IP05/5 | IP50 | IP200 | IP500 | ![]() |
俙 | 兂40 | 兂50 | 兂60 | 兂80 | |
俛 | 41.2 | 63 | 73 | 99 | |
俠 | 5 | 10 | 10 | 15.5 | |
俢 | 兂60 | 兂90 | 兂110 | 兂140 | |
俤 | 兂50 | 兂74 | 兂90 | 兂116 | |
俥(Three division) | 兂4.2 | 兂6.3 | 兂8.3 | 兂10.5 | |
俧丂(Socket intuition affinity) | 6.35倱倯 | 9.5倱倯 | 12.7倱倯 | 19倱倯 | |
weight | 189倗 | 632倗 | 1.8倠倗 | 3倠倗 |
公司介紹:
Metrel公司于1957年成立,作為測量工具和檢測設備的生產企業提供內容廣泛且具有革新性的產品。Metrel是在開發和制造高品質的電子測量和試驗設備領域的國際領先公司之一。除了廣泛的產品范圍,Metrel還提供了一個完整的支持,包括維修和校準,技術支持和客戶培訓計劃。公司總部位于在Horjul,并有一個獨立的分銷商的全球網絡。Metrel分銷商提供全面的服務手冊和校準程序,現場高效的售后支持的合適的工具。每一個儀器提供生產數據的驗證(校準協議)。
產品介紹:
Metrel電氣測試儀器 Metrel測頭 Metrel電力質量分析儀 Metrel調壓器
聯系人:錢東勇 先生
希而科貿易(上海)有限公司
電話:021-2036 3055
021-2036 3155
手機:156 1868 0205
郵箱:qdy@silkroad24.com
QQ:2290765323
S 2036MI 6201STMETREL Compuflow 8570MI2292MI2094MI2124MI2121MI2142MI2392MI3201MD9210MI2125MI2126MI3252MI2127MI2086EUA 1019A 1021S 2001MI3203HTN 450/30 3/M500 and please see to photoMI3200MI3202MI3200 10kv 5mAMA 4804TL410 cod 1.10.100A1046A1056S2003MI2077MI 2088MI 2171MI 2092MI 3123MI 2124MI 3125BMI 2093MI 2592MI 3200MI 6201TEK 4010TEK 1313MD 9030FLUKE-123/007SMI2171MI2092A1046MI2077A1056TL410 CODE:1.10.100MI3200MI3200MI3100TL410 CODE:1.10.100TL410 CODE:1.10.100TL410 CODE:1.10.100TL410 COD.1.10.140
德國工控備件采購
1、總部位于德國,享受德國本土企業的價格折扣。
2、德國公司集中采購,統一清關。
3、每周四從德國發貨,次周四可完成清關。
4、產品可修或換,由我司跟廠家溝通。
5、不易尋找品牌、小金額,我們同樣為您采購。
6、只要是歐洲的產品我們都可以為您詢到價格并采購!
全國總代理品牌(選型&技術服務):
Ahlborn 萬能數據采集器 (配不同類型的傳感器以采集該類型的數據)
Beck 差壓開關 (與樓宇Honeywell對應)
Proxitron 高溫接近開關,熱金屬檢測 (鋼鐵廠熱軋、冷軋,與ifm對應)
Honsberg 流量計,液位計 (與科寶kobold型號對應可替換)
Knick 水質分析儀,電極 (與梅特勒METTLER對應可替換)
Knick 隔離放大器 (應用鋼鐵,地鐵高壓直流系統)
Mankenberg 閥門 (減壓閥、排氣閥、溢流閥)
優勢經銷品牌:
傳感器 HYDAC(賀德克) Turck PMA Balluff burster baumer
編碼器 heidenhain baumer
液壓類 Parker Hawe moog Barksdale巴士德 hilge
模塊 西門子6DD、7ML系列產品 B&R dold
閥門類 EA 德國MOOG Gestra parker G.BEE dopag
電 機 danfoss bauer VEM Jahns
過濾器濾芯 Mahle(瑪勒) hydac
光柵尺 heidenhain pauly(寶利)
加熱器 FUNKE helios Backer
機械類 fibro schunk SMW schlick
通風柜壓力傳感器,測風管壓力傳感器,風壓測量儀器,風壓測試儀器,風機微風壓傳感
PTJ501-1吸塵器用廣東省佛山市氣壓傳感器,容器密封性氣壓傳感器,浩捷電子氣壓變送器,正負氣壓力傳感器,正負氣壓壓力變送器,管道正負氣壓傳感器,管道氣壓變送器,正負微氣壓力傳感器,正負氣微壓力變送器,中央空調氣壓傳感器,中央空調氣壓變送器,爐膛氣壓傳感器 ,爐膛氣壓變送器,風管風壓傳感器,氣壓傳感器,氣壓變送器,風壓傳感器,風壓變送器 浩捷電子氣壓力傳感器/變送器特性:1:進口美國高精度硅壓阻式差壓芯體,精度比起同行就能高一個層面,分辯率也達到了一個升的高度.2:浩捷電子自主研發的抗干擾路路系統3:外殼是進口鋁合金材質,經久耐用.4:浩捷電子微壓傳感器外殼結構人性化設計,連接口才用φ8mm直徑壓迫式旋塞結構合M10*1小螺紋組裝方便了在測量小壓力使拆裝.5:在拼裝方型壓差傳感器前就原用了高密度的硅膠涂上連接面后在四腳均采用了四個小螺母固死,從而達到傳感器防潮性提高.
廣泛應用于鍋爐送風、井下通風,中央空調,風管風力,樓宇自控等電力、煤炭行業壓力過程、有氣壓要求的實驗室、消防工程用的室內氣壓力控制領域。 從而也稱之為:PTJ氣壓壓力傳感器, PTJ氣壓差傳感器, PTJ大氣壓傳感器,PTJ 高溫風壓傳感器佛山浩捷好,管道風壓傳感器,管道風壓力傳感器,風壓力變送器,管道風壓力變送器,PTJ風機風壓傳感器,PTJ室內氣壓力監控傳感器,室內氣壓力變化測量傳感器.
主要技術參數: 量 程: ±(50Pa~200Pa~1KPa~10KPa ~100KPa) 耐 壓: 量程值的三倍綜合精度: 0.5%FS、1.0%FS 輸出信號: 4~20mA(二線制)、0~5V、1~5V、0~10V(三線制) 供電電壓: 24DCV(9~36DCV) 介質溫度: -20~85℃ 環境溫度: 常溫(-20~85℃) 負載電阻: 電流輸出型:最大800Ω;電壓輸出型:大于50KΩ 絕緣電阻: 大于2000MΩ (100VDC 密封等級: IP65 穩定性能: 0.1%FS/年 振動影響: 在機械振動頻率20Hz~1000Hz內,輸出變化小于0.1%FS 電氣接口(信號接口): 引出導線 機械連接(螺紋接口): M10×1,可按用戶要求設計生產