免费看国产曰批40分钟视频,九级黄色视频,美女涩视频网站,一级中文免费无码专区,精品911国产高清在线观看,日本日本乱码伦视频在线观看,精品国产911在线观看

掌上型超聲波探傷儀PXUT-T3

 功能和特點:
● 第一款體積最小的掌上式數字超聲波探傷儀,僅250g(含電池),雙電池配置,電池更換像手機,方便快捷。
● 觸摸屏與按鍵兩種方式操作。使用其中任意一種都可以獨立完成操作,也可以兩種方式交互使用
● 領先的半反半透、高對比度TFT彩色液晶顯示器,不管是在強光還是光線不足的環境下,探傷畫面始終清晰可見,適應各種操作環境。
● 多種顏色任意調節符合個性化的操作設計
● 采用通用型C9探頭接口,通用性強。

主要技術指標:

 

項目 指標 項目 指標
頻帶寬度 0.4~15.0MHz 增益范圍 110dB
0.1,1.0,2.0,6.0步進
動態范圍 ≥30dB 垂直線性 ≤4%
水平線性 ≤0.5% 檢測范圍 0~5000mm(鋼中縱波)
分 辨 力 ≥30dB 靈敏度余量 ≥50dB   (200mm—Φ2平底孔,2.5PΦ20)
探頭類型 單晶、雙晶、穿透 聲程位移 0~4800mm(鋼中縱波)
閘    門 進波門 顯   像 器 3.5”TFT觸摸顯示器
電    源 9V  DC,220V AC 外形尺寸(mm) 140(高)×82(寬)×26(厚)
工作時間 ≥4小時 整機重量 250g(含鋰電池)  
該公司產品分類: 金相顯微鏡 無損檢測 硬度計 金相制備 三坐標測量機 光譜儀

TS-2007L型數字式超聲探傷儀

TS-2007L型數字式超聲探傷儀體現了的超聲探傷儀設計和制造技術。它是一款功能實用、性能的數字式超聲探傷儀,其質量水平不僅符合,而且還超過了國標(JB/T10061-1999)要求。采用國內首創的一體化電路,免維護設計;便于儀器升級!功能和特點:※ 采用國際進(國內首創)的工控型CPU系統,雙CPU協同工作,儀器控制部分與數據處理獨立工作,系統運行高速,現場性能。※ 全中文觸摸式鍵盤,直觀易記;全中文操作提示,容易掌握,使用方便! 自動測定儀器和探頭性能,儀器校準自動化,可測量材料厚度和材料聲速。日歷時鐘,儀器能自動記錄工作日期和時間! 16個獨立探傷頻道(可擴展至500個頻道),多種探傷工藝和探傷標準自動生成,可自由設置各行業探傷工藝標準,現場探傷無需攜帶試塊。※ 回波抑制1~90%任意可調,不影響儀器增益和線性! DAC、AVG曲線自動生成并能分段制作,取樣點不受限制,并可進行補償與修正。DAC曲線隨增益自動浮動隨聲程自動擴展?蓪崿F(xiàn)指定回波的距離波幅補償! 缺陷回波參數(距離、水平、垂直、波幅、dB當量、孔徑Φ值)實時顯示! 具有峰值記憶、回波包絡、波形凍結、焊縫截面示意等功能! 進波報警功能,門位、門寬、門高任意可調! 500組探傷工藝和數據存貯,F(xiàn)LASH RAM存儲器技術(同黑匣子),離電保存! 數據處理能力強,可按日期和序號進行檢索和處理,可與計算機實現數據通訊。打印報告無需專配打印機! 鋰電池供電,低功耗設計,可連續工作6小時以上。低電壓工作報警和自動保護關機! 真彩顯示,大屏幕、高清晰、寬視角,不受電磁場干擾。在強陽光下無需遮光罩,就能獲得滿意的觀察效果! 超薄(厚僅50mm)、超輕(含電池1.28Kg),單手把握的扶手和設計合理的背帶,使您在探傷時輕松自如,尤其適宜高空作業和移動性大的場合! ......主要技術指標:探頭方式:直、斜、雙晶、竄透增益范圍:0~110dB (0.1,2.0,6.0dB步進)探測范圍:0.0~5000.0mm頻帶寬度:0.4~15.0MHz水平線性:<0.1%垂直線性:<3.0%分 辨 率:>30dB動態范圍:>30dB靈敏度余量(2.5MHz Φ20):>52dB閘 門:門位、門寬、門高連續可調DAC、AVG曲線:任意點,可選擇打印輸出:存儲波形和數據顯 示 器:真彩顯示320×240電池工作時間:>6小時工作溫度:-20℃~50℃電 源:7.2VDC,220VAC外形尺寸:235(高)×140(寬)×50(厚)(mm)整機重量:1.28Kg(含電池)  

CTS-22模擬超聲波探傷儀

 超聲波探傷儀CTS-22是攜帶式A型脈沖反射式超聲波探傷儀,可用交流電或電池供電工作。儀器采用高亮度、內刻度矩形示波管,具有工作頻率寬、探傷靈敏度高、穩定性好、波形清晰和體積小、重量輕、耗電省以及操作方便等特點。

超聲波探傷儀CTS-22儀器適用于金屬和部分非金屬材料的無損檢測,尤其適用于流動性大的野外或高空探傷作業,可作為無損檢測人員資格考核用標準化儀器。

主要技術性能:

工作頻率范圍

0.5~10MHz

衰減器

80dB,每2dB±0.1dB

垂直線性誤差

≤5%

動態范圍

≥30dB

掃描范圍(鋼縱波)

10~5000mm

水平線性誤差

≤1%

最小探測距離

≤3mm(配用5N14窄脈沖探頭)

遠場分辨率

≥30dB(配用2.5P20-D探頭)

脈沖移位范圍(鋼縱波)

0~400mm

靈敏度余量

≥46dB(2.5P20-D直探頭發現200mm-ф2平底孔)

重量

主機4.5Kg,帶電池6.3Kg

體積(長×寬×高)

300mm×254mm×100mm

儒佳檢測公司專門供應超聲波探傷儀CTS-22,歡迎咨詢 
該公司產品分類: 其他理化檢測 氣體檢測儀 光譜儀 看譜鏡 顯微鏡 便攜式硬度計 X射線探傷附件 磁粉、滲透探傷耗材 超聲波試塊 X射線劑量檢測儀 工業X射線膠片 磁粉探傷儀 涂層測厚儀 超聲波測厚儀 磁粉探傷耗材 X射線探傷耗材 磁粉探傷機 X射線探傷機 超聲波探傷儀 超聲波側厚儀

美國奧林巴斯Olympus EPOCH 600超聲探傷儀

 
美國奧林巴斯Olympus EPOCH 600超聲探傷儀
產品名稱:超聲探傷儀
規格型號:EPOCH 600
品牌廠家:美國奧林巴斯Olympus
  
旋轉飛梭
EPOCH 600型儀器的旋轉飛梭與確定鍵和返回鍵一起使用,可以對參數值進行粗略和細微調節。在檢測過程中,操作人員可以鎖住旋轉飛梭,以避免參數值被意外修改。這種硬件配置可以快速切換參數值,滿足了那些偏好使用飛梭調整參數的用戶的要求。旋轉飛梭配置的設計符合IP66要求。
 
瀏覽鍵區
EPOCH 600型儀器的瀏覽鍵區是EPOCH探傷儀的標志性特色。瀏覽鍵區的向上、向下箭頭鍵用于參數的粗略調節,向左和向右箭頭鍵用于參數的細微調節。瀏覽鍵區還包含其他幾個功能及常用參數,如:增益、保存、確定鍵及返回鍵。瀏覽鍵區硬件配置的設計符合IP67的要求。
標準軟件特性
動態DAC/TVG:對比DAC曲線或?qū)Ρ雀鶕?jù)時變增益確定的參考回波波幅,以百分比或以分貝水平計算信號波幅。DAC版本包括ASME、ASME 3、JIS和自定義。此外,還包括以下主要特性:動態可調DAC曲線、DAC和TVG視圖切換、自定義DAC報警曲線。 DGS/AVG:這是一種利用與特定類型探頭和材料相關的DGS/AVG圖形,評估回波信號的缺陷定量技術。DGS/AVG圖形表明回波高度、缺陷尺寸以及到探頭的距離這些參數之間的關系。 曲面校正:在進行管材或棒材檢測,使用角度聲束探頭沿著曲面進行周向檢測時,曲面校正功能可校正聲程信息。
可選軟件特性
AWS D1.1和D1.5:為各種不同的AWS(美國焊接協會)焊縫檢測應用提供一個動態反射體缺陷指示定級。這個功能省去了手工計算的步驟,從而提高了檢測效率。
模板存儲:可在屏幕上將實時波形與所保存的參考波形對比。只需按下相關的一個按鈕,即可隨時切換保存模板的開啟或關閉狀態,進行快速波形對比。在需要不同靈敏度水平的檢測中,增益調整功能可以為每個保存的模板提供一個不同的基本增益。對于點焊分析及其他應用,這個功能非常實用。 API 5UE:可按照API建議的程序5UE進行缺陷定量。在OCTG管材的驗證過程中使用波幅距離差分技術(ADDT)測量潛在的缺陷尺寸。由于所有ADDT變量都采集于峰值記憶包絡,因此測量過程既簡單又可重復。 波形平均:這個功能可利用一個實時A掃描圖像代表持續采集到的A掃描的平均值。在探測到靜態缺陷時,波形平均功能可改進信噪比。平均除數為2、4、8、16、32。
數據記錄與PC機連接
數據管理
EPOCH 600型儀器提供多種存儲、歸檔、報告檢測數據和校準數據的方法。儀器的機載存儲容量多達50000點。此外,移動存儲卡可為儀器增加2 GB的存儲量。儀器還與Olympus NDT的PC機接口程序GageView Pro完全兼容?焖俚奈募O(shè)置功能和靈活的數據管理功能使得儀器對檢測數據的記錄及報告變得簡單有效。
GageView Pro
數據記錄器
EPOCH 600型儀器有一個用于存儲校準文件和檢測文件的機載數據記錄器。儀器的標準配置有兩個主要文件類型:校準(CAL)類型文件和增量(INC)類型文件。CAL文件可以保存幾乎無限的參數設置。所保存的設置可被快速方便地調用到當前設置。INC文件可在單一文件名稱下保存多組檢測數據,檢測過程中可以下載和報告這些數據。
擴展的數據記錄器軟件選項增強了機載數據記錄器的性能:擁有腐蝕型數據記錄器文件的全部類型。這個選項包含以下數據文件類型:序列型、帶自定義點的序列型、2-D柵格型、帶自定義點的2-D柵格型、3-D柵格型、鍋爐型、2-D EPRI型。
MicroSD卡及打印
EPOCH 600型儀器使用2 GB MicroSD存儲卡作為機載和移動存儲設備。操作人員可以使用移動存儲設備,以位圖格式存儲屏幕圖像,用于制作報告,還可以.csv格式導出當前的或保存的測量值和校準數據。第二個2 GB MicroSD卡安裝在儀器中的PC板上,用于所有機載數據的存儲。在儀器被損壞無法修復時,可到授權的服務中心將儀器中的MicroSD卡取出,從損壞的儀器中拯救出關鍵性的數據。
EPOCH 600型儀器除了具有可移動存儲裝置,還可與PCL5 USB打印機兼容。因此,操作人員可以在現場直接從儀器打印檢測報告,而不需要PC機或外置存儲卡讀卡器。
便攜、堅固、符合人體工程學要求
外觀特性
EPOCH 600型儀器是一款重量輕、易攜帶的探傷儀,其堅固、靈活的特點使其可用于幾乎所有檢測環境中。該款儀器的一些外觀特性如下: • 寬屏、全VGA分辨率、透反顯示,無論在室內光線還是直射的陽光下都可顯示明亮清晰的圖像。 • 儀器的4個角裝有外膜為橡膠的保護套,起到防撞擊、抗磨損的作用。 • 4個拴系胸掛帶的位置。 • 無需使用工具即可打開的電池艙和側邊的I/O蓋。 • 用于穩固放置儀器的支架,帶有直角彎鉤,可在0度到180度之間變換直立的角度。 • 儀器側面用于封住USB OTG接口及移動存儲卡接口的帶密封墊的蓋。 • 標準內置充電鋰離子電池。 • 標準AA堿性電池盒,提高了儀器的便攜性。 • 重量輕,設計符合人體工程學,增加了儀器的便攜性和使用的方便性。
美國奧林巴斯Olympus EPOCH 600超聲探傷儀標準配件 • EPOCH 600數字式超聲探傷儀,AC電源操作或電池操作。 • 充電器/AC適配器(100 VAC、115 VAC、230 VAC,50 Hz或60 Hz) • 充電鋰離子電池 • 堿性電池盒 • 儲運箱 • 基本操作用戶手冊 • 簡易入門說明書 • 信息全面的操作手冊(CD)
外觀特性(后面板)
儀器輸入/輸出 
USB端口 
USBOTG)端口 
RS-232端口 
有。 
視頻輸出 
標準VGA輸出。 
模擬輸出 
1個模擬輸出(可選),可選的1 V/10 V全標度,最大4 mA。 
數字輸出 
3個報警輸出,5V TTL,10 mA。 
保修 
1年有限擔保。 
 
環境評級 
IP評級 
根據IEC 60529-2004(外殼防護等級- IP規范)標準,瀏覽鍵區硬件設計符合IP67侵入保護標準,旋轉飛速硬件設計符合IP66侵入保護標準。  在新開發的產品正式投入生產以前,Olympus NDT要對產品的設計進行內部檢驗。該款儀器經測試證明符合IP評級標準。 
爆炸性氣氛 
通過美軍標準MIL-STD-810F方法511.4程序I中規定的測試,可在國家防火協會規范(NFPA 70500節I2分段D組中定義的爆炸性氣氛中安全操作。 
防撞擊測試 
通過了美軍標準MIL-STD-810F方法516.5程序I中規定的測試,每個軸6個循環,15g11 ms半弦波。 
防振動測試 
通過美軍標準MIL-STD-810F方法514.5程序I附錄C6中的測試,一般暴露:每軸1小時。 
工作溫度 
-10 °50°C
電池存儲溫度 
0 °50°C
 
該公司產品分類: 拉拔儀 混凝土表面輪廓儀 扭力扳手 扭力螺絲刀(扭力批) 泵油 瀝青密度儀 金屬探測儀 低溫真空油脂 真空潤滑脂 混凝土探傷儀 聲級計 電子天平 離心機 工業管道內窺鏡 推拉力計 測振儀 氣象儀 涂布刮墨棒 剎車盤磨損測試儀 瓶壁測厚儀

安徽超聲波探傷儀合肥焊縫探傷儀用于測量焊縫點內部是否有損傷等一系列焊接點測量儀器

技術特點:最新推出的GH-6900是一種先進的數字式超聲探傷儀,符合JJG746-2004規程,彩色顯示,鮮明亮麗采用嵌入式計算機系統和超大規,F(xiàn)場可編程集成電路設計,具有多顏色的TFT顯示和許多新特點,承襲和改進了HY系列超聲波探傷儀所有經過實踐驗證的先進信號處理和實用探傷功能及測量能力;通過LAN以太網接口可實現與計算機的實時通訊,大容量數據庫存儲,高速USB2.0接口和SD存儲卡將詳細的檢測數據輸出到計算機等,可滿足各種挑戰性的探傷應用需求。該儀器用于檢測各種材料內部的缺陷(鋼、不銹鋼、銅、鋁、硬質合金、鑄件、復合材料、和焊縫等等),可有效檢測出氣孔、裂紋、疏松、夾雜、未焊透等缺陷,功能全面實用,是真正的筆記本式數字超聲波探傷儀,廣泛應用在壓力容器制造、金屬鋼結構、船舶制造、機械制造、電力、化工、石油機械、汽車、冶金、高校等行業。 功能特點:90個獨立探傷通道,各通道探傷參數可存儲在SD卡上(也可轉存至電腦PC機上),永久不丟數據;中文觸摸式鍵盤,操作過程亦有中文提示。儀器內存有JB4730、GB11345、DL/T820、ASM/API/Other等標準,DAC曲線自動生成,也可根據實際工件(如焊縫、鍛件、鑄件、管材、板材、車軸、車輪、小徑管等)生成自定義探傷工藝,現場探傷無需攜帶試塊。內置有大平底、平底孔鍛件探傷方法,AVG曲線自動生成,自動計算鍛件探傷靈敏度,可實時顯示缺陷孔徑Φ值。手動、自動校驗探測功能兩種模式;只需找準最高波,可實現探頭自動校準(始偏、K值),亦可測試材料聲速。 三角聲程測量數據和SL值(DAC)、缺陷孔徑Φ值(AVG)實時顯示,聲程數據可用毫米和微秒(聲波傳輸飛行時間)顯示。屏幕凍結定量功能,隨時捕捉波形,包括峰值記憶和包絡波形。儀器具有動態記錄功能,實時記錄探傷波形動態變化,真實還原探傷過程,支持主機和電腦播放,能做到逐幀數據回放打印。報警功能包括進波門、DAC門、AVG門定位聲光報警,門位、門寬和門高可任意調節;另有一路模擬音頻報警信號輸出(可接頭戴式耳機,用于環境噪聲大的場合,也可接駁外置報警裝置);彩色TFT液晶屏顯示動態變化顏色的波形,可以在從明亮、陽光直射到完全黑暗的環境中高對比度地觀察波形。液晶屏快速的響應時間(60Hz刷新率)能夠保證在快速掃查時回波也顯示無遺;確保無漏檢之憾。 擴展軟件功能:焊縫剖面缺陷定位顯示;RF 射頻模式下的回波-回波功能。數據輸出包括一個 USB 接口、一個LAN以太網接口、一個SD卡插槽,存儲器的容量擴充至10萬個波形數據/通道探傷參數(1G SD卡);體積。ㄍ庑纬叽220X185X55 mm),重量輕,帶電池僅1.6Kg;使用進口高能鋰離子充電電池,工作時間達5小時。性能指標:120Mhz采樣,60Hz屏幕刷新率,工作頻率范圍0.1-40MHz,顯示屏:6.5〞高亮度、高分辨率彩色TFT液晶顯示屏增益:110dB(0.1、2、6、步距調節,亦可直接輸入增益值)聲程最小顯示范圍0.1-7.5mm(鋼縱波)探測范圍:0.1-8000mm(鋼 縱波)聲速范圍:1m/s~9999m/s(1mm步距調節,亦可直接輸入聲速值)動態范圍:> 36dB垂直線性誤差:< 3 % 水平線性誤差:< 0.1% 噪聲電平:< 8%靈敏度余量:> 62dB(探頭2.5P Φ20,試塊 200mm Φ2平底孔) 脈沖移位:0.0~3000mm 探頭延時:0.00us~50.00us,分辨率0.01us 掃描分辨率:0.1mm (0~100mm);1mm (100~1000mm);10mm (1000~8000mm) 探頭類型:單探頭、雙晶探頭、穿透探頭閘 門:進波門、失波門讀數標準配置:主機:一臺(不含電池)。電源:一套(5000mHA鋰離子電池一塊,充電器一只)。探頭:直探頭2.5P Φ20,一個;斜探頭2.5P 13X13 K2,一個)。探頭線:C9-Q9兩根。讀卡器:一個;SD卡:一個(容量隨機)。文件資料:說明書一份,合格證一張,保修卡一張,裝箱單一份。技術資料:拷貝在SD卡內,含探傷儀電子文檔說明書、常用探傷標準、超聲波探傷常識。探傷數據處理軟件一套。鋁合金專用儀器箱一只 。

該公司產品分類: 電力測量儀器 水分測定儀系列 光學測量儀器 力學測量儀器 電子秤/電子天平 無損檢測儀器 硬度計 環境氣候試驗箱 實驗室專用儀器 工程測繪器 便攜式測量儀器

RBFD探傷儀

 RBFD435 超聲波探傷儀是一款增強型場致高亮全數字式超聲波探傷儀,它能夠快速便捷、無損傷、精確地進行工件內部多種缺陷(裂紋、夾雜、氣孔等)的檢測、定位、評估和診斷。既用于實驗室,也用于工程現場檢測。本儀器廣泛應用在各地特檢院、建設工程質量檢測站、鍋爐壓力容器制造、工程機械制造業、鋼鐵冶金業、鋼結構制造、船舶制造、石油天然氣裝備制造等需要缺陷檢測和質量控制的領域,也廣泛應用于航空航天、鐵路交通、鍋爐壓力容器等領域的在役安全檢查與壽命評估。

儀器特點:功能全、性價比高。

1、   全中文操作鍵膜,簡捷易懂;2、全中文顯示,主從式菜單,并設計有快捷按鍵和數碼飛梭旋輪,操作便捷,技術領先;3、全數字場致發光高亮顯示器(EL屏),高性能安保電池模塊,便于拆裝,可以脫機獨立充電,大容量高性能鋰離子電池模塊使儀器連續工作時間延長到八小時以上;4、儀器輕小便攜,單手即可以把持,經久耐用,引導行業潮流。

該公司產品分類: 流量計

TUD210數字超聲探傷儀

TUD210 數字超聲探傷儀簡介:

·EL高亮度圖形點陣顯示,可以滿足強日光下、涵洞內使用的要求;·DAC曲線偏置可調,滿足了任何標準的要求;·超高采樣率;·整機全部軟件可以通過通訊口在線升級;·超薄超輕(厚度53mm 含電池重1.2kg)。

TUD210 數字超聲探傷儀主要特點:

技術指標: 1.測量范圍(mm):2.5~5000(鋼縱波)2.工作頻率(MHz):0.2~103.增益調節:0~110dB; 4.垂直線性誤差:≤3%5.動態范圍:≥32dB6.水平線性誤差:≤0.2%7.波形顯示: 正半波、負半波、全波和射頻8.探傷靈敏度余量:≥50dB9.脈沖移位:-20~+3400 us10.探頭延時:0us~99.99us,分辨率0.0111.掃描分辨率:0.1mm (2.5~100mm);       1mm(100~1000mm);       10mm(1000~5000mm)12.聲速:1000m/s~9999m/s13.外形尺寸(mm):230×184×5314.重量(含電池):1.2KgTUD210 數字超聲探傷儀功能特點:·超高采樣速率,射頻波形細節盡現,最小顯示范圍2.5mm!ね瑫r具備USB和RS232串行通訊口!ふ麢C全部軟件可以通過通訊口在線升級。用戶可以在時代網站下載本機嵌入式軟件,自行升級,方便快捷!碛须娮訒r鐘日歷!ご笕萘看鎯ζ骺纱鎯Ω哌_(dá)400幅A掃圖形及參數和40000個厚度值!400個獨立探傷通道!な褂么笕萘夸囯x子電池,無記憶性,連續工作時間約6小時。·具有三條可調偏置的DAC曲線,可以適應不同行業中DAC曲線的繪制標準。· EL高亮度圖形點陣顯示屏,無視角限制、不受溫度、陽光影響!ぞ哂须p閘門設置和報警功能。能夠在屏幕上任意設置閘門的位置和寬度,有進波、 失波和自動三種報警方式。·可以在單探頭和雙探頭兩種探傷工作方式之間任意切換!ぬ筋^阻尼通過菜單選擇在50、150、400之間切換!た梢岳脴準試塊自動生成DAC曲線!ぞ哂芯性抑制功能,屏高的0~80%,步距:1%!ぞ哂写蛴」δ,通過串行打印機打印厚度報告與波幅曲線!た梢赃M(jìn)行屏幕硬拷貝,將當前屏幕上的圖形和菜單拷貝并打印。·能夠跟PC機通訊,擁有功能強大的windows數據處理軟件。標準配置:1.主機 1個2.直探頭  F20  2.5MHz (1支)3.斜探頭 8×9K2  5MHz (1支)4.LEMO探頭連電纜 2根選配件:1.行式熱敏打印機(TPUP-NH)2.串行通訊電纜3.PC通訊軟件4.筆記本電腦

Phasor系列Phasor系列超聲波探傷儀-美國GE

我公司為GE檢測科技華南授權經銷商,歡迎來電咨詢!公司網址:www.sztmp.com 

Phasor系列超聲波探傷儀提供4款不同型號,具有可升級的特點和優勢。Phasor CV是編碼兼容的傳統超聲波探傷儀,可升級為Phasor 16/16 Weld或16/64 Phasor XS?赏ㄟ^快速簡便的軟件升級至相控陣Phasor 16/16 Weld或相控陣Phasor XS.無需更換主基板硬件,利用相同的簡單菜單驅動的界面作為Phasor CV模型,不需要培訓。與相控陣傳感器相結合,兩個平臺都可以在更短的時間內,以合理的價格解決您最苛刻的檢測應用要求。

Phasor 16/16 Weld和Phasor XS可以迅速切換到常規UT,這樣檢測員可以使用任何標準的傳感器,評估檢測到的缺陷(定位和尺寸)是否符合指定標準或測試規范的要求。

Phasor CV/DM集相控陣成像設備和傳統的探傷儀于一體,具有相控陣探頭,可以顯著提高腐蝕檢測數據的性。

特色:

 

改進的檢測生產率

下載

 

 
接受軟件條款 close
 
NOTICE – READ THIS  CAREFULLY: THIS IS A LEGAL AND BINDING  AGREEMENT BETWEEN YOU AND LICENSOR. BY INSTALLING THE SOFTWARE, YOU AGREE TO  ALL THE TERMS AND CONDITIONS OF THIS SOFTWARE LICENSE (“LICENSE”). IF YOU DO  NOT AGREE TO THESE TERMS, DO NOT DOWNLOAD OR INSTALL THE SOFTWARE. 1. Definitions Unless otherwise agreed to by Licensor, the following terms shall mean: “Documentation” means all material, including all printed material and on-line or electronic documentation (excluding training materials), referencing the Software and Third-Party Software provided hereunder. “Software” means Licensor’s proprietary computer software and software security devices provided by Licensor under this License. “Third-Party Software” means any proprietary computer software owned by a third party that Licensor may provide to you hereunder. 2. License Grant 2.1 Subject to the terms of this License, Licensor hereby grants to you a non-transferrable and nonexclusive license to use the Software and Documentation, including upgraded, modified or enhanced versions provided by Licensor and to use the Third-Party Software, all for your internal business purposes only 2.2 You have no right to (i) lease, rent, transfer, distribute, sublicense, timeshare or allow third parties to access the Software, Documentation or Third-Party Software, nor assign any rights hereunder to a third party without Licensor’s prior, written agreement; (ii) disassemble, decompile, reverse engineer or otherwise attempt to reconstruct or discover the source code of the Software or Third-Party Software; (iii) pledge the Software or Third-Party Software as collateral or otherwise or encumber such Software or Third-Party Software with any lien or security interest; or (iv) remove any product identification, copyright, trademark or other notice from the Software, Documentation or Third-Party Software. If you  believe that you are entitled to reverse engineer the Software as a matter of local law (e.g., the Council Directive of May 14, 1991, of the Council of the European Communities, as amended), you agree that you shall first request technical information from Licensor. You shall use any technical information delivered by Licensor only for purposes of ensuring “interoperability” and compatibility and shall treat such technical information as Proprietary Information (defined below). Any reverse engineering of the Software shall void any warranties or indemnification obligations of Licensor and shall automatically release Licensor from any obligation to provide support services under this or any separate agreement. 2.3  Certain software Licensor provides to you may contain Third-Party Software, including but not limited to “open source” software. Use of the Third-Party Software and its source code may be governed by separate copyright notices and license provisions, which may be found or identified in the Documentation or on the media delivered with the Software and which are incorporated by reference into this License. You shall not modify or combine the Software and/or any Third-Party Software in any manner that could cause, or could be interpreted or asserted to cause, the Software or any modifications thereto to become subject to the terms of any license applicable to Third Party Software. 2.4  Unless otherwise agreed to by Licensor or specified on your accepted Purchase Order, you shall only have the right to install and use a single copy of the Software and Third-Party Software on a single computer workstation for use by a single user, which may be referred to as a “CPU License.” If “Local Area Network License” rights were purchased, you are authorized to install and use by the designated maximum number of concurrent users on any number of I/O access stations for a designated Local Area Network (LAN). LAN is defined as a hard-wired computer network system which inter-connects computers within a building, facility or site. A facility or site is defined as a production factory or plant producing a product or multiple products at a single location. Concurrent users are defined as your employees logged onto the software application at the same time regardless of activity. Use over a Wide Area Network (WAN) is strictly prohibited, except as may be provided by separate agreement resulting from special license negotiations. WAN is defined as any computer network system that inter-connects one or more computers within a building, facility or site to one or more computers residing outside the same building, facility or site. 2.5 You may make one (1) copy of the Software, Documentation and Third-Party Software for backup purposes only. You must reproduce and include all proprietary rights and copyright notices on any backup copies. Except as authorized under this License, no copies of the Software, Documentation or Third-Party Software may be made by you or any third party; provided, however, you may print online Software documentation for its own internal use, provided the maximum number of copies may not exceed the number of users  licensed hereunder. 3. Support Services; Upgrades This License does not obligate Licensor to provide maintenance and support on any  Software or Third-Party Software licensed hereunder. Support services are available under separate agreement. If the Software is an upgrade of a previous version (provided such upgrade was obtained under a separate support services agreement with Licensor or a Licensor authorized distributor), you may use the upgraded Software only in accordance with this License. Licensor will use commercially reasonable attempts to answer your technical support requests concerning the Software during Licensor’s normal business hours; however, this service is offered as a convenience to you, and Licensor may not be able to resolve every support request. For technical support requests, you may contact Licensor, as indicated in the Documentation or Help section of the Software. Licensor reserves the right to charge for customer support services, provided you receives advance notice of all applicable charges. IN NO EVENT WILL GE OR ITS SUPPLIERS BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT, CONSEQUENTIAL, PUNITIVE OR SIMILAR DAMAGES OF ANY KIND RESULTING FROM THE DELIVERY OR NON-DELIVERY OF TECHNICAL SUPPORT SERVICES OF ANY  KIND. THIS INCLUDES, BUT IS NOT LIMITED TO, PERSONAL INJURY, PROPERTY DAMAGE, DAMAGE TO ANY PARTY\\\\\\\\'S COMPUTER OR OTHER EQUIPMENT AND THE LOSS OF ANY DATA. 4. Verification During the term of this License and for 3 years thereafter, Licensor may upon reasonable notice require that an independent audit of the use of the Software and Third-Party Software be conducted during your normal business hours. Upon such notice, you shall provide Licensor’s independent auditor site access and  the right to inspect relevant portions of your computer system on which the Software and Third-Party Software resides. 5. Term and Termination 5.1 The Software, Documentation and Third-Party Software shall be considered accepted by you upon receipt. 5.2 This License is effective until terminated. Licensor may terminate this License immediately if you fail to comply with any of the terms and conditions herein. Upon termination, you shall (a) cease using the Software, Documentation and Third-Party Software and (b) certify to Licensor within one (1) month of termination that you have destroyed or returned to Licensor the Software, Documentation and Third-Party Software, and all copies thereof. 6. Ownership 6.1 All Software, Documentation and Third-Party Software are licensed and not sold. You agree that Licensor and its suppliers own all proprietary rights, including, but not limited to any patent, copyright, trade secret, trademark and other proprietary rights in and to the Software, Documentation and Third-Party Software, including any Derivative  Works thereof, and any corrections, bug fixes and updates to such Software, Documentation, Third-Party Software or Derivative Works. For purposes hereof, “Derivative Works” shall mean (i) any work that is based upon one or more pre-existing works, such as a revision, enhancement, modification, translation, abridgement, condensation, expansion, extension or any other form in which such pre-existing works may be recast, transformed or adapted, and that, if prepared without the authorization of the owner of the copyright to such pre-existing works would constitute a copyright infringement and (ii) any compilation that incorporates such a pre-existing work. You shall have only a “right to use” license to any Derivative Works in accordance with the terms of this License. 6.2 For the purposes of this Article, the term “Licensor” shall mean Licensor, its  affiliates and their successors or assigns. 7. Limited Warranties 7.1 Licensor warrants, for your benefit alone, that under normal use the media in which the Software is embedded shall be free from defects in material and  workmanship, for a period of one (1) year from the date of delivery of the initial Software (“Warranty Period”). 7.2 Licensor warrants, for your benefit alone, that during the Warranty Period, the  Software will perform substantially in accordance with its Documentation. If, during the Warranty Period, an Error occurs (where “Error” is defined as a problem caused by an incorrect operation of the unmodified computer code in the Software or an incorrect statement or diagram in the Documentation that produces incorrect results), Licensor will use commercially reasonable efforts to correct such Error, provided you furnish Licensor with the following: (a) written notice of the warranty claim,  including a description of the failure to perform in accordance with the Documentation and a specific description of the operating conditions (including the specific software/hardware configuration) under which the failure occurred and (b) to the extent feasible, a representative sample of inputs for repeating and analysing the failure. If Licensor is unable, after commercially reasonable efforts, to correct the Error, your sole remedy shall be termination of this License and a refund of the license fees allocable to the specific nonconforming Software that have been paid by you to Licensor hereunder. 7.3 This Article sets forth the exclusive remedies for all claims based on failure of or defect in the Software and Documentation, whether the failure or defect arises before or during the Warranty Period and whether a claim, however instituted, is based on contract, indemnity, warranty, tort (including negligence) or civil liability, strict liability or otherwise. The warranties provided herein are  exclusive and are in lieu of all other warranties and guarantees whether written, oral, implied or statutory. NO IMPLIED STATUTORY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. Without limiting the foregoing, Licensor does not warrant that the Software or Documentation (or YOUR use thereof) will be free from all errors or its use will be uninterrupted. 7.4 Any remedial steps taken by Licensor hereunder shall not extend the applicable Warranty Period. 7.5 Except as expressly authorized by Licensor in writing, all Third-Party Software shall carry only the warranties provided by the owners thereof and Licensor gives no warranties for such Third-Party Software. 8. Proprietary Information; Equitable Relief 8.1 All information concerning or embedded in the Software (including but not limited to source code and training materials), Documentation and Third-Party Software is confidential and shall be considered Licensor’s (or its suppliers’) proprietary information (“Proprietary Information”) whether or not the information is marked as Proprietary Information. The Proprietary Information includes commercially valuable, substantial trade secrets, the design and development of which reflect the effort of skilled development experts and investment of considerable amounts of time and money. 8.2 You acknowledge: (a) any use of the Software, Documentation or Third-Party Software in a manner inconsistent with this License or (b) any other misuse of the Proprietary Information of Licensor (or its suppliers), will cause immediate irreparable harm to Licensor (or its suppliers) for which there is no adequate remedy at law. You agree that Licensor (or its suppliers) shall be entitled to immediate and permanent injunctive relief from a court of competent jurisdiction in the event of any such misuse or threatened misuse by you. The parties agree and stipulate that Licensor shall be entitled to such injunctive relief without posting of a bond or other security; provided, however, that if the posting of a bond is a prerequisite to obtaining injunctive relief, then a bond in an amount equivalent to U.S. $1,000 shall be sufficient. Nothing contained herein shall limit Licensor’s right to any remedies at law, including the recovery of damages from you for breach of this License. 9. Compliance With Laws You understand and recognize that the Software, Documentation and Third-Party Software made available to you hereunder are subject to all applicable trade control laws and regulations. You hereby agree that you will not tranship, re-export, divert or direct the Software, Documentation or Third-Party Software, other than in and to the ultimate country of destination specified on your order or declared as the country of ultimate destination on Licensor’s invoice, except as permitted by applicable laws and regulations. 10. Limitation  of Liability 10.1 The total liability of Licensor, on all claims of any kind (excluding claims for death or bodily injury), whether in contract, warranty, indemnity, tort/extracontractual liability (including negligence), strict liability or otherwise, arising out of the performance or breach of this License or use of any Software, Documentation and Third-Party Software, shall not exceed the price of the specific Software, Documentation or Third-Party Software giving rise to the claim. All Licensor’s liability under this License shall terminate upon the expiration of the Warranty Period, provided that you may enforce a claim of such liability accruing during the Warranty Period by an action timely commenced in accordance with the applicable statute of limitations or statute of repose, but in no event greater than one (1) year after the expiration of such Warranty Period. 10.2 In no event, whether as a result of breach of contract, warranty,  tort/extracontractual liability (including negligence), strict liability, indemnity or otherwise, shall Licensor be liable for loss of profits or revenues, loss of use of the Software, Documentation or Third-Party Software or any associated equipment, interruption of business, cost of capital, cost of cover, downtime costs, claims of your customers for such damages or for any special, consequential, incidental, indirect, punitive or exemplary damages. 10.3 If Licensor furnishes you with advice or assistance that is not required under this License, the furnishing of such advice or assistance will not subject Licensor to any liability, whether in contract, indemnity, warranty, tort (including negligence), strict liability or otherwise. 10.4 For the purposes of this Section 10, the term “Licensor” shall mean Licensor, its affiliates, subcontractors and suppliers of any tier and their respective agents and employees, whether individually or collectively. 11. Dispute Resolution, Governing Law 11.1 If you have your pertinent place of business in a country other than the U.S.,  Korea, Taiwan, Japan, Thailand, Vietnam, Indonesia or the Philippines, any dispute arising out of or in connection with this License, including any question regarding its existence, validity or termination, shall be referred to and finally resolved by arbitration under the London Court of International Arbitration (“LCIA”) Rules, which Rules are deemed to be incorporated by reference into this clause. The number of arbitrators shall be one unless the amount in dispute exceeds the equivalent of $1,000,000, in which event it shall be three. When three arbitrators are involved, each party shall appoint one arbitrator, and those two shall appoint the third, who shall be the Chairma. None of the arbitrators may be a national or resident of the countries in which either party is organized or has its principal place of business. The seat, or legal place, of arbitration shall be London, England. The arbitration shall be conducted in the English language. In reaching their decision, the arbitrators shall give full force and effect to the intent of the parties as expressed in this License, and if a solution is not found herein, shall apply the governing law of this License. The decision of the arbitrator shall be final and binding upon both parties, and neither party shall seek recourse to a law court or other authority to appeal for revisions of such decision. 11.2 If you have your pertinent place of business in the U.S., Korea, Taiwan, Japan, Thailand, Vietnam, Indonesia or the  Philippines, any dispute arising out of or in connection with this License, shall be brought in the U.S. District Court for the Northern District of New York, or in the event that court lacks jurisdiction to hear the claim, in the appropriate state courts of Onondaga County, New York, and the parties irrevocably consent to the exclusive jurisdiction of such courts in respect of all such claims. Each party hereby submits to and accepts generally and unconditionally the jurisdiction of those courts with respect to its respective person and property, and irrevocably consents to the service of process in connection with any such action or proceeding by personal delivery to the party or by the mailing thereof by registered or certified mail, postage prepaid to the other party at the address for the party. 11.3 The validity, performance and all matters relating to the interpretation and effect of this License and all further documents executed pursuant to it shall be construed and interpreted in accordance with the laws of (i) the State of  New York, U.S., if you have your pertinent place of business in the U.S. or (ii) England and Wales if you have your pertinent place of business outside of the U.S., excluding its rules on the conflict or choice of laws. If you have your pertinent place of business outside of the U.S., the United Nations Convention on Contracts for the International Sale of Goods shall not apply. 12. Patent Indemnification 12.1 Subject to the terms of this License, Licensor shall indemnify you against any damages, costs and expenses arising out of any suit, claim or proceeding (a “Claim”) alleging that the Software or Documentation infringes a patent in effect in the U.S., an EU member state or country of delivery (provided there is a corresponding patent issued by the U.S. or an EU member state) or U.S. copyright or copyright registered in the country of delivery; provided that: (a) you promptly notify Licensor in writing of any such Claim; (b) you make no admission of liability and gives Licensor sole authority, at Licensor’s expense, to direct and control all defense, settlement and compromise negotiations; and (c) you provide Licensor with full disclosure and assistance that may be reasonably required to defend any such Claim. 12.2 Licensor shall  have no obligation or liability with respect to any Claim based upon: (a) any Software or Documentation that has been altered, modified or revised; (b) the combination, operation or use of any Software or Documentation with other products when such combination is part of any allegedly infringing process; (c) failure of you to implement any update provided by Licensor that would have prevented the Claim; or (d) unauthorized use of Software or Documentation, including, without limitation, a breach of the provisions of this License. 12.3 Should any Software or Documentation or any portion thereof, become the subject of a Claim, Licensor may at its option (a) procure for you the right to continue using the Software or Documentation or portion thereof, (b) modify or replace it in whole or in part to make it non-infringing or (c) failing (a) or (b), take back the Software or Documentation and refund any fees received by Licensor attributable to the infringing Software or Documentation. 12.4 This states Licensor’s entire liability for indemnification for patent, trademark, copyright and trade secret infringement for the Software or Documentation. 12.5 Notwithstanding the foregoing, with respect to any Third-Party Software or portions thereof, only the indemnity of the manufacturer/developer, if any, shall apply. 13. General Clauses 13.1 Software and Third-Party Software licensed hereunder are not intended for use in connection with any nuclear facility or activity without the written consent of Licensor. You warrant that you shall not use or permit others to use Software or Third-Party Software for such purposes, unless Licensor agrees to such use in writing. If, in breach of the foregoing, any such use occurs, Licensor disclaims all liability for any nuclear or other damages, injury or ontamination and in addition to any other legal or equitable rights of Licensor, you shall indemnify and hold Licensor harmless against any such liability. If Licensor agrees in writing to any such nuclear use, Licensor’s special terms and conditions for nuclear applications and protections against nuclear liability shall be attached and incorporated fully herein by reference. 13.2 Licensor may assign or novate its rights and obligations under this License, in part or in whole, to any entity directly or indirectly controlling, controlled by or under common control with Licensor without your consent. You agree to execute such documents as may be necessary to effect the assignment or novation. The delegation or assignment by you of any or all of your duties or rights under this License without Licensor’s prior written consent shall be void. 13.3 If any provision of this License is found to be void or unenforceable the remainder of this License shall not be affected and the parties hereby agree that they will replace any such void or unenforceable provision with a new provision that achieves substantially the same practical or economic effect and which is valid and enforceable. 13.4 This License represents the entire agreement between the parties, and no  modification, amendment or waiver shall be binding on either party unless agreed in writing by the parties’ authorized representatives. 13.5 For direct and indirect U.S. government contracts only, all Software,  Documentation and Third-Party Software provided hereunder shall be considered “commercial items” as defined in FAR Part 2, 2.101 and in accordance with FAR 52.244-6. If the reasonableness of the price cannot be established, if cost or pricing data is required for any other reason, or if the Software,  Documentation or Third-Party Software cannot be considered “commercial items,” Licensor may withdraw the proposal or cancel this License without penalty or other liability. 13.6 Upon request you agree to provide Licensor with a signed copy of this License.
 
page-loader
  close
 
 
 
 
說明 中文 English Français Deutsch 日本語 Português RU Español
Corrosion Erosion Brochure   acrobat-reader         acrobat-reader  
Inspection Technologies Brochure   acrobat-reader   acrobat-reader     acrobat-reader acrobat-reader
Phasor CV Brochure   acrobat-reader acrobat-reader acrobat-reader   acrobat-reader   acrobat-reader
Phasor CV/DM Brochure   acrobat-reader         acrobat-reader  
Phasor PDI Kit Brochure   acrobat-reader            
Phasor Series   acrobat-reader acrobat-reader acrobat-reader       acrobat-reader
Phasor Series Brochure             acrobat-reader  
Phasor Series Operating Manual   acrobat-reader acrobat-reader acrobat-reader       acrobat-reader
Phasor Series Overview Flyer   acrobat-reader         acrobat-reader  
Phasor Series Quick Start acrobat-reader acrobat-reader acrobat-reader acrobat-reader        
Phasor XS Data Sheet acrobat-reader acrobat-reader acrobat-reader acrobat-reader acrobat-reader     acrobat-reader
按此下載 Phasor XS Ultrasonic Portable Flaw Detector Software Update

美國GE/德國KK超聲波探傷儀

特級代理:美國GE/德國KK 超聲波探傷儀 歡迎訂購!
1.         Phasor XS便攜式相控陣超聲波探傷儀
2.         USM Vision超聲焊縫檢測探傷儀
3.         USM35X 支柱瓷絕緣子及瓷套專用超聲波探傷儀
4.         USM35XS 超聲波探傷儀
5.         USM GO Advanced型超聲波探傷儀
6.         USM GO DAC超聲波探傷儀
7.         USM GO AWS超聲波探傷儀
8.         USM GO Basic超聲波探傷
9.         USM35XDAC 超聲波探傷儀
10.     USN58L/R 超聲波探傷儀
11.     USN60 超聲波探傷儀

檢測范圍 聲速范圍 顯示延遲 探頭延遲 阻尼 測試模式 脈沖發生器 脈沖電壓(方波脈沖模式) 脈沖寬度(方波脈沖模式) 脈沖能量(方波脈沖模式) 脈沖重復頻率 增益 頻率范圍 閘門監視器 聲程測量 整流 抑制 單位 輸出 顯示屏 A掃描尺寸 A掃描刷新頻率 數據存儲 厚度值存儲 語言 探頭連接 鍵盤 電源 工作溫度 存儲溫度 尺寸和重量

1~27940mm(鐵)連續可調或在預置范圍內可調 250~16000m/s,連續可調,1m/s步進,65種材料聲速可選 -20~3498us 0~999.9us 50、75、150、1000Ω 脈沖回波法,雙晶法和穿透法 方波脈沖 50~450v,步進為10v 50~1000ns,步進為10ns 低、高 15~6000Hz,自動低、自動高和手動調節 110dB,以0.1/0.5/1/2/6dB為單位分級調節;用戶可自己定義,可鎖定 0.25~25MHz,有10種設置可供選擇 兩個獨立的閘門 始波至回波,可選擇前沿或峰值多回波 RF/全波/正/負半波整流 0~80%,線性 公英制可選 TTL報警信號/模擬輸出/RS232輸出 98x113mm,640x480象素VGA,4種顏色可選,8種A掃描顏色可選,帶背光,可調節明暗度 標準440x401象素,或440x201象素 60Hz 最少200組數據,包括儀器的操作參數和A掃描,可保存2年 最多99999個厚度值 德語、英語、法語、意大利語、葡萄牙語、西班牙語、丹麥語、瑞典語、挪威語、芬蘭語、荷蘭語、羅馬尼亞、捷克、斯洛文尼亞 Lemo或BNC接口 國際標準鍵盤 6個NiMH(9Ah)電池,可工作6小時 0~55℃ -25~70℃(不帶電池) 282x150x159mm,3kg
 
該公司產品分類: 轉速表 測振儀

CYE-3z長期供應便攜電磁軛探傷儀

特點及用途:。CYE-3Z型除有CYE-3A的一切功能外,根據用戶需求隨機配置磁鉗形探頭,環形探頭,達到一機多用目的。主要技術指標:1.提升力:交流磁軛98N(10Kg);帶活動關節時69N(7 Kg);旋轉磁場98N(10 Kg)(被探工件表面與探頭端面氣隙1.5mm。2.探頭極距:交流磁軛探頭,固定式為155mm,帶活關節時為50-200mm;旋轉磁場兩相鄰探頭鐵芯中心距為125mm;。探頭工作電壓36V。3.靈敏度:磁軛,旋轉磁場探傷時均可清晰顯示30/100A型標準試片上的人工刻槽。4.電源電壓:交流220V、50Hz。5.重量:電磁軛探頭2 Kg,旋轉磁場探頭4 Kg。6.探頭配置A/D,  D/E,  A/O,A/E. 

該公司產品分類: 手持式激光元素分析儀 手持式合金分析儀 便攜式直讀光譜儀 靜電阻測試儀 埋地管道探測檢漏儀 埋地管道防腐綜合參數測量儀TD-AY506B 埋地管道防腐層絕緣電阻測量儀 紅外熱像儀 安全閥在線檢測儀 殘余應力儀 表面燒傷檢測儀 手持式土壤重金屬分析儀 鋼絲繩探傷儀 測溫儀 測振儀 硬度計 測厚儀 移動式直讀光譜儀 全譜直讀光譜儀 火花直讀光譜儀

最新產品

熱門儀器: 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計(PH計) 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑